Degrees per mouse count
Apex0.022°
CS20.022°
Both games turn 0.022° per count, so the same sensitivity gives the same turn.
Apex to CS2 Sensitivity
CS2 sensitivity =
Apex sensitivity × 1
Both games turn 0.022° per mouse count, so the same sensitivity at the same DPI gives the same turn.
Worked example · 800 DPI
Apex1.114
CS21.114
46.64 cmper 360°, both games
18.36 inper 360°
891 → 891eDPI
Different value? Find it in the chart or let the Windows app read it from your game.
46.64 cm / 360°Apex 1.114 = CS2 1.114 · 800 DPI
Conversion chart
Apex to CS2 sensitivity chart
Apex values from 0.40 to 3.20, the CS2 value with the same 360° distance, and how far you move the mouse for one full turn at 400, 800 and 1600 DPI.
| Apex | CS2 | cm/360 · 400 DPI | cm/360 · 800 DPI | cm/360 · 1600 DPI |
|---|---|---|---|---|
| 0.40 | 0.400 | 259.77 | 129.89 | 64.94 |
| 0.60 | 0.600 | 173.18 | 86.59 | 43.30 |
| 0.80 | 0.800 | 129.89 | 64.94 | 32.47 |
| 1.00 | 1.000 | 103.91 | 51.95 | 25.98 |
| 1.11 | 1.114 | 93.28 | 46.64 | 23.32 |
| 1.20 | 1.200 | 86.59 | 43.30 | 21.65 |
| 1.40 | 1.400 | 74.22 | 37.11 | 18.56 |
| 1.60 | 1.600 | 64.94 | 32.47 | 16.24 |
| 1.80 | 1.800 | 57.73 | 28.86 | 14.43 |
| 2.00 | 2.000 | 51.95 | 25.98 | 12.99 |
| 2.20 | 2.200 | 47.23 | 23.62 | 11.81 |
| 2.40 | 2.400 | 43.30 | 21.65 | 10.82 |
| 2.60 | 2.600 | 39.97 | 19.98 | 9.99 |
| 2.80 | 2.800 | 37.11 | 18.56 | 9.28 |
| 3.00 | 3.000 | 34.64 | 17.32 | 8.66 |
| 3.20 | 3.200 | 32.47 | 16.24 | 8.12 |
How this conversion works
One multiplier from two yaw values
Apex → CS2
× 1
Apex turns 0.022° per mouse count at sensitivity 1. CS2 turns 0.022°. The ratio of the two is the multiplier.
- CS2 sensitivity
- CS2 = Apex × 0.022 ÷ 0.0221.114 × 1 = 1.114
- Back to Apex
- Apex = CS2 × 0.022 ÷ 0.0221.114 × 1 = 1.114
- cm per 360°
- 2.54 × 360 ÷ (yaw × sens × DPI)914.4 ÷ (0.022 × 1.114 × 800) = 46.64 cm
- eDPI
- sensitivity × DPIApex 891, CS2 891 at 800 DPI. eDPI only compares players inside one game.
A length you can measure
360 ÷ (0.022 × 1.114) = 14,689 counts
14,689 ÷ 800 DPI = 18.36 in = 46.64 cm
Divide 360° by the angle per count to get counts per turn, then divide by DPI to get inches.
Other match methods
360° distance or monitor distance
The chart matches 360° distance, which does not depend on field of view. Monitor distance matching (0%, 56.25%, 75%, 100%) depends on the FOV you set in Apex. The TrueSens app reads your FOV and shows every method side by side.
TrueSens for Windows · free · open source
What this page can't do
This page is a reference chart. The parts that need your PC are in the free Windows app:
- Reads your current sensitivity from Apex's config file, so you don't have to look it up.
- Writes 1.114 into CS2 (cs2_user_convars_0_slot0.vcfg) and keeps a backup you can restore.
- Measures your real DPI. An 800 DPI mouse can really be 826, which changes your cm/360.
- Draws 46.64 cm at true size on your screen after a one-time bank-card calibration.
- Blind A/B feel test between your old feel and the converted CS2 value.
"Open in TrueSens" starts the installed app with Apex 1.114 → CS2 already filled in (truesens://convert?from=apex&to=cs2&sens=1.114). If nothing opens, install the app first. Windows 10 and 11, x64, no ads, no account.
Going the other way
CS2 to Apex sensitivity
Use the same value. CS2 1.114 is Apex 1.114.
Related charts
More Apex and CS2 pairs
FAQ
Apex to CS2 sensitivity questions
How do I convert Apex sensitivity to CS2?
Use the same value. Apex and CS2 both turn 0.022° per mouse count, so Apex 1.114 is CS2 1.114 at the same DPI.
What is 1.114 Apex sensitivity in CS2?
1.114 at any DPI. At 800 DPI both settings turn you 360° with 46.64 cm of mouse movement.
Does DPI change the Apex to CS2 conversion?
No. The multiplier is the same at 400, 800 or 1600 DPI as long as you use the same DPI in both games. DPI only changes your cm/360.
Should I match 360 distance or monitor distance from Apex to CS2?
360 distance keeps full turns and flicks identical and does not depend on field of view, so the chart on this page uses it. Monitor distance matching depends on the FOV you play with; the TrueSens app reads it from your settings and gives you that value too.
How do I set my converted sensitivity in CS2?
Open the CS2 console and enter sensitivity 1.114, or set it in the game's mouse settings. The free TrueSens app for Windows can write the value into the CS2 config for you and keeps a backup.
How do I convert CS2 sensitivity to Apex?
Use the same value: CS2 1.114 is Apex 1.114.